Pneumatic glue dispensers – manual and semi-automatic liquid glue dispensing machines for industrial/electronic assembly.

Semi-automatic glue dispenser. Application form:It is suitable for yellow glue, fast-drying glue, epoxy resin, and other commonly available products, and is widely used for bonding various electronic components, manufacturing machinery, measuring instruments, jewelry, and other objects. Specification Color:Black color Model: 982 Material: Metal Spraying mode: Manual / Semi-automatic. Minimum drop volume: 0.01 ml. Spray duration: 0.1-9.9 seconds. Automatic timing (adjustable): 0.01-30 seconds. Repeat accuracy: ±0.5% Internal voltage: 12-24DC Inlet air pressure: 2.5-7bar(35-100psi) Outlet air pressure: 0.1-5.5 bar (1-78 psi) Power supply: 110V AC, 60Hz. Power consumption: 20W. Plug specifications: American standard, 110V. Product dimensions: 23156 cm / 9.055.92.36 inches. Included in the list.1The main dispenser unit.1 Switch it manually;1 foot switch1 * Air hose;1 * connecting;1 * Power cord;1 * Dispenser stand;Liquid container 2* 30CC6 liquid dispensing needles1 * Chinese and English manual Vacuum suction.This semi-automatic glue dispenser comes with a vacuum-assisted back-suction system, which effectively prevents glue from dripping during operation, ensuring more precise glue dispensing and maintaining a clean and organized working environment. Get started quickly:This product uses high-quality electronic valves that can instantly activate the diaphragm valve, resulting in over 80% improved performance. Precise droplets:The minimum droplet volume is 0.01 milliliters, and the spray duration ranges from 0.1 to 9.9 seconds. It can deliver droplets with high precision and repeatability, with an accuracy of approximately 0.5%. Additionally, it features a single-channel manual control switch, allowing for manual control for greater precision and timeliness. Semi-automatic design:It can be operated automatically by a machine, or precisely controlled using a single-hand switch. If you want to free up your hands, you can set the switch to the automatic position, resulting in more efficient and higher-quality operation. Stable voltage change:It stands out with its high-end, all-copper coil transformer.This helps maintain stable voltage fluctuations and extends the lifespan of the device.It can also be used in work environments with high frequency and intensity.Improve workplace safety while maintaining efficiency and energy conservation. High-precision air pressure gauge.High-precision air pressure gauges can accurately control the air pressure supplied to the air pump and precisely convert the air pressure, ensuring that the air hose does not rupture. Durable and robust:The product is made of metal, making it strong and durable, and resistant to damage and corrosion. It also uses a fourth-generation chip design circuit board, which significantly enhances its stability. Prevent pregnancy.Design:It comes with a high-quality electronic valve, which has the following features...Prevent pregnancy.This function ensures better safety during operation and also effectively extends the lifespan of the semi-automatic glue dispensing machine. Note: 1. The maximum inlet air pressure should not exceed 7 bar (100 psi), and the maximum operating pressure of the glue dispensing head should not exceed 5.5 bar (78 psi). If the operating air pressure exceeds 4 bar, please switch to using an aluminum fitting. 2. If applicable, store all materials at a constant temperature (5°C) as recommended to ensure that the concentration does not change significantly during use. 3. If the material is too concentrated (and therefore difficult to dispense), it may not drip properly. If you need to use it, dilute it according to the manufacturer’s instructions before use. Before starting work, mix the material thoroughly to ensure consistent droplet size. 4. In automatic mode, a general air pressure adjustment of 1-2.7 bar (15-40 psi) is more suitable. When operating in automatic mode, the suction force of the vacuum hose should be adjusted to an appropriate level. Excessive suction can cause the piston to be washed out and disrupt its normal operation. 5. The machine operates in automatic mode. in real-world situations. Any residual material on the needle tip should be removed promptly. These materials will gradually It hardens and causes difficulties in material release and retraction. After use. The cylinder should be cleaned in a timely manner. Otherwise. Disassembling the cylinder will be very difficult.